29
Groove Looper: Adjusting Time Settings
Adjust Time Settings:
1. Tap on the time settings area to enter time settings
2. Adjust BPM
(A) Tap on the center 3 times or more for Tap Tempo functionality
(B) Tap the edge of the circle and rotate the dial to change tempo
1. The BPM setting will always follow the BPM of your current preset; changing your preset
before recording will change the BPM to the BPM of the current preset. Once a loop has
been recorded, the BPM will not change along with the preset.
2. Because the loop limit is 60 seconds, if a BPM and Loop Length setting exceeds this limit,
the options will be grayed out e.g.
I. If the BPM is 40, 12 and 16 bars will not be selectable
II. If the Loop Length is set to 12, the minimum BPM will be 47 because any lower
will exceed 60 seconds
3. Minimum BPM is 40, Maximum BPM is 400
(C) Ending Toggle
1. On: Ending drum fill will play when you stop playback
2. Off: stops playback immediately
(D) Adjust Loop Length
1. Adjust the length of the loop to predetermined lengths
(E) Adjust Count
1. Select between straight 4/4 feel and shuffle 4/4 feel
2. This determines what Drum patterns are available
I. Straight feel will have Rock, Funk and Pop available; Blues will not be available to
select
II. Shuffle feel will have Blues available, Rock, Funk and Pop will not be available to
select
To Next Page
Loading...
