06
A - Power Switch !
Hold to turn on/off Spark 2.
B - Instrument Input (1/4”) !
For general electric guitars, acoustic guitars or basses.
C - Preset Selector !
Turn the knob to switch between the 8 customizable presets. !
Press the knob to swap between the 4 red and 4 green preset banks.
D - Amp Control !
Controls the gain, EQ and master of the amp model in the current preset.
E - Effect Control !
Controls the MOD/DELAY/REVERB effect levels in the current preset.
F - Guitar Volume Control !
Controls the overall volume of your guitar.
G - Music Volume Control !
Controls the volume of Bluetooth music playback, USB audio and the looper click.
H - Looper Control (more options available in the Spark app, see p.23)!
REC/DUB: "Tap to start recording or overdubbing. Tap again to stop recording and start playback. !
PLAY/STOP: Starts/stops the loop playback. Hold to switch between Auto Mode and Signal Detection
Mode for standalone recording:
•
Auto Mode (Click On): Adjustable loop length. It will automatically start recording after a 1 bar
count-in and stop recording when reaching the length set in the Time Settings menu in the Spark
app. It’s the default recording mode.
•
Signal Detection Mode (Click Off): Free length. It will automatically start recording when Spark 2
detects a guitar signal, users tap on the record button to stop recording. The REC/DUB LED will
show yellow when switching to Signal Detection Mode.
!
UNDO/REDO (CLEAR): Removes/restores the last layer added to the loop. Hold to completely erase the
recorded loop.!
I - Tap/Tuner !
Tap to set the tempo of delay effects and the looper. Hold to enter Tuner mode.
J - Headphone Output (1/8”) !
Plug in a pair of headphones with a 1/8” jack.
K - Battery Indicator !
Indicates battery status. With Battery loaded:
Solid Green: Battery level 50-100%!
Solid Yellow: Battery level 10-50% !
Solid Red: Battery level under 10%!
Flashing Green/Yellow/Red: Charging
L - Wireless Indicators !
Indicates the status of Bluetooth and Wi-Fi connections.!
!
Solid Blue/Green: Connected !
Flashing Blue/Green: Pairing
Front Panel
To Next Page
Loading...
