PDR-7000 Operation Manual
1. Turn off the power.
2. Remove the power cord from the electrical outlet of the junction box.
3. Replace fuses.
1) Fuse holder in the direction of the
arrow
to pull it out.
2) Replace the fuses and reset the fuse holder in its original position.
5.3 Replacing printing paper
1. Turn the LCD of control box as a 90-
degree.
2. Push down the button next to the printer
with the rear end of touch-screen pen.
3. Take the paper roll out of printer box.
4. Put the new paper roll into a printer box.
5. Pull the printer paper out of the printer cover
and close the printer cover.
- 88 -
To Next Page
Loading...