This document provides information to service the equipment base independent of the
installed console. For console service documentation, refer to the particular console service
manual.
This document contains information required to perform Troubleshooting and replacement pro-
cedures required to repair and maintain this equipment including: general product information,
software diagnostic procedures, preventative maintenance procedures, inspection and adjust-
ment procedures, Troubleshooting procedures, replacement procedures and system block
and wiring diagrams.
Additional Documentation
There is also an online web version if you have internet access at: Online Service Manuall
See Also
"General Information" on page7
"General Information" on page7
Standard Service Software
"Adjustment/Calibration Procedures" on page46
"Replacement Procedures" on page65
Troubleshooting
"Electrical Systems" on page220
"Parts" on page227
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 2
1 Introduction