Accessory Tray Cover Replacement
Accessory Tray Cover Replacement
ID Description
Accessory Tray Cover
Removal Instructions
1.
Remove the Goose Neck Gasket , Goose Neck cover , and Lift Top cover ,
see "Lift Front Cover Replacement" on page72.
2. Remove the two #3 Phillips fasteners, Then lift the two top left and right tabs and
remove the Accessory Tray . Retain part(s) and/or fastener(s) for installation.
Installation Instructions
1.
Reinstall the Accessory Tray , press to snap the top two left and right tabs in place
and secure with the two #3 Phillips screws.
2.
Reinstall the Goose Neck Gasket , Goose Neck cover , and Lift Top cover ,
see "Lift Front Cover Replacement" on page72.
Lift Rear Cover Replacement
Lift Rear Cover Replacement
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 77
6 Replacement Procedures
Covers and Panels Replacement