Precor Experience Series User Manual

Generator/Brake assembly Replacement
Applies To: Single Stage Input Drive
About
This procedure provides instruction to remove and install the Generator/brake assembly for a
single stage input drive system.
Procedure
Review entire procedure before starting.
Removal Instructions
1. Remove the left and right Drive Housing covers, see "Drive Housing Covers Replace-
ment" on page88.
2. Remove the Input Drive belt, see "Drive Belt Replacement (single stage drive)" on
page103.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 116
6 Replacement Procedures
Generator/Brake Assembly Replacement

Precor Experience Series Specifications

General

Brand	Precor
Model	Experience Series
Category	Fitness Equipment
Language	English