Precor Experience Series User Manual

1. Make sure the console is set to the Welcome banner.
2. Press and hold the VOL down hardkey while pressing CH up > Pause > Pause > CH
up:
3. Touch the designated display positions and follow prompts to complete the touchscreen
calibration.
Debug Information Report shortcut
Console shortcut to download an event log debug information report.
Steps
1. Make sure the console is set to the Welcome banner.
2. Insert a USB
1
flash drive into the Chin USB port.
3. Press and hold the VOL Up hardkey while pressing CH up > CH Dwn > CH Dwn >
CH up:
4. Wait for the download to finish and then remove the USB drive.
IMPORTANT: Do not remove the USB drive until the "Report was successful" message
is shown, (approx. 1 min).
1
Short for Universal Serial Bus, is an industry standard developed in the mid-1990s that
defines the cables, connectors and communications protocols used in a bus for connection,
communication, and power supply between computers and electronic devices.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 24
4 Standard Service Menus
How to Access the Service Menus

Precor Experience Series Specifications

General

Brand	Precor
Model	Experience Series
Category	Fitness Equipment
Language	English