Generator/Brake assembly Replacement
Applies To: Dual Stage Input Drive
About
This procedure provides instruction to remove and install the Generator/Brake assembly for
dual stage input drive assembly.
Procedure
Review entire procedure before starting.
Removal Instructions
1. Remove the left and right Drive Housing Covers (includes removing the Stairarms from
the Input Drive Cranks), see "Drive Housing Covers Replacement" on pageî88.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 135
6 Replacement Procedures
Generator/Brake Assembly Replacement
To Next Page
Loading...
Need help?
General
