Precor Experience Series User Manual

BeltTension Specification
.Drive belt tension specification:
Belt Specification
Single Stage Drive Belt Tension 93-100 lbs (42- 45 kgs)
Dual Stage Drive: First Stage Drive Belt Tension -
New Belt
140-150 lbs (63.5 - 68 kgs)
Dual Stage Drive: First Stage Drive Belt Tension -
Used Belt
125 - 135 lbs (56.7 - 61 Kgs)
Dual Stage Drive: Second Stage Drive Belt Ten-
sion - New Belt
110-120 lbs (50- 54.4 kgs)
Dual Stage Drive: Second Stage Drive Belt Ten-
sion - Used Belt
92 - 105 lbs (43 - 47.6 kgs)
Bolt Grade Identification
(missing or bad snippet)
Parts
IMPORTANT: Always purchase OEM replacement parts and hardware from Precor.
If you use parts not approved by Precor, you could void the Precor Limited Warranty.
Use of parts not approved by Precor may cause injury.
There is a copy of the parts Exploded View Diagram and Parts Identification List included in
the Parts chapter (see "Parts" on page227)that you can use as a quick reference. It is recom-
mended that you go to the servicer partners Precor Connect (or Precor Connection) website
to view the most current parts information including the Exploded View Diagram and Parts
Identification List.
l
Precor Connect Partner website
Exploded View Diagram and Parts List, see Parts Exploded View & Parts List.
.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 13
2 General Information
Bolt Grade Identification

Precor Experience Series Specifications

General

Brand	Precor
Model	Experience Series
Category	Fitness Equipment
Language	English