Precor Experience Series - Page 86

ID Description
Lift rear Cover
Removal Instructions
1.
Remove the Goose Neck Gasket , Goose Neck cover , and Lift Top cover ,
see "Lift Front Cover Replacement" on page72.
2.
Remove the Accessory Tray , see "Accessory Tray Cover Replacement" on the pre-
vious page.
3.
Remove the two #3 Phillips fasteners, Then lift the Lift Rear cover upward and rear-
ward to remove. Retain part(s) and/or fastener(s) for installation.
Installation Instructions
1.
Slide the Lift Rear cover downward onto the top of the Forward Frame Filler cover
while lightly pressing forward to engage the six cover attachment clips.
2. Secure using the two #3 Phillips fasteners.
3.
Reinstall the Accessory Tray , see "Accessory Tray Cover Replacement" on the pre-
vious page.
4.
Reinstall the Goose Neck Gasket , Goose Neck cover , and Lift Top cover ,
see "Lift Front Cover Replacement" on page72.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 78
6 Replacement Procedures
Covers and Panels Replacement