3. Reinstall the Input Drive belt and tension to specification 93-100 lbs (42- 45 kgs), see
"Drive Belt Replacement (single stage drive)" on page103.
4. Reinstall the left and right Drive Housing covers (includes reinstalling the Stairarms onto
the Input Drive Crank), see "Drive Housing Covers Replacement" on page88.
5. Reinstall the left and right Drive DiskCovers, see "Drive Disk Covers Replacement" on
page84.
6. Reinstall the Drive Access Panel, see "Drive Access Panel Replacement" on page83.
7. Verify machine operation and return to service, see "Operation Verification" on page16.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 154
6 Replacement Procedures
Input Drive Assembly Replacement