l SAVE: Typically reserved for Precor use. Saves the CPA Event Log error codes to a
USB
1
flash drive.
Removing Error Codes
Select the CLEAR softkey to remove all error codes from the CPA Error Log.
Saving the CPA Error Log
The save CPA Event Error Log feature is used by Precor to investigate machine issues. Occa-
sionally, Precor may request you to save the CPA Error Log error code data to a USB flash
drive and then send the USB drive to Precor customer service.
To save the CPA Error Log:
l Access the CPA Event Log.
l Insert a USB flash drive into the USB chin port.
l Then wait for the SAVE button to highlight and select SAVE.
l Follow prompts to complete the save process.
l Remove the USB flash drive and verify that the error log data file was saved.
l Return the USB drive as directed by Precor customer service.
1
Short for Universal Serial Bus, is an industry standard developed in the mid-1990s that
defines the cables, connectors and communications protocols used in a bus for connection,
communication, and power supply between computers and electronic devices.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 215
7 Troubleshooting
Error Log & CPA Event Log
To Next Page
Loading...
Need help?
General
