When the test is completed the console will automatically exit and return to
the System Tests menu.
l Touchscreen Test: Verify that there is a trace created that follows your fin-
ger movement across the touchscreen surface. Select Finish to exit. move
your finger and verify that a trace follows
l Backlight Test: Tests the display backlight brightness. Follow prompts to
complete test.
l RGB Test: Touch the screen to cycle through the test colors:Red, Green,
Blue, White, & Black. Returns to the System Tests menu when completed.
l Numeric Backlight Test: Tests the controls numeric display brightness.
Returns to the System Tests menu when completed.
l Numeric Display Test: Tests the controls numeric display. Returns to the
System Tests menu.
2. Exit the Diagnostic Test menu. (press Back to exit & return to the banner screen)
Motion Controls Test
Verify the machine operation.
1. Select QUICKSTART to begin a manual workout. While pedaling the machine
perform the following tests:
2. Operate the RESISTANCE motion control from minimum to maximum range
while verifying the machine operation.
l Make sure that the console RESISTANCE paddle control operation is
smooth and working correctly.
l Vary the RESISTANCE from minimum to maximum and back to minimum
while pedaling, verify that the pedal resistance increases and decreases as
expected.
l Verify that there were no unusual noises during this test.
l Verify that the console RESISTANCE indicators and workout displays are
showing correct information.
3. Operate the INCLINE motion controls from minimum to maximum levels while
verifying the machine operation.
l Make sure that the console INCLINE paddle controls operation is smooth
and working correctly.
l Vary the INCLINE from minimum to maximum and back to minimum, verify
that the crossramp raises smoothly to the maximum level and returns
smoothly to the minimum level.
l Verify that there were no unusual noises during this test.
l Verify that the console INCLINE indicators and workout displays are show-
ing correct information.
Heart Rate Test
Verify both the Hand Held Heart Rate (HHHR
1
) and wireless HR
2
monitor operation.
1
Handheld Handlebar Heart Rate
2
Heart Rate
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 17
3 Operation Verification
Operation Verification Tests