Precor Experience Series User Manual

INFORMATION DISPLAY DESCRIPTION
U-BOOT SW The console upper boot software version information.
U-BASE SW or
MAIN CONSOLE SW*
The console upper base software version information.
*P31 console only.
METRICS BOARD SW The console Metrics board software version information
SER NUMBER
Displays the model and serial number of the machine. The
base serial number can be set using the WinCSAFE com-
puter software. The factory default is NONE.
USAGE LOG
Displays the type of workout programs the users are
accessing most frequently.
"Error Log & CPA Event Log"
on page211
Table of stored error event codes.
TIP: You can quickly access the Error log by holding down
the PAUSE key. Will show the STUCK KEY message
when there are no logged error codes.
(1)Only used on products with the ASL feature. Not included on the EFX600 series, the
TRM600 series, or the TRM800-10 (TRM10/GEN06) series products.
(2)TRM600 series treadmills only.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 32
4 Standard Service Menus
LED Console Standard Service Menus

Precor Experience Series Specifications

General

Brand	Precor
Model	Experience Series
Category	Fitness Equipment
Language	English