Menu: Service menu (51765761) > Settings > Maintenance
(1)
Provides machine maintenance related information including: routine maintenance due status,
machine operating condition, and ASL state.
MAINTENANCE
MENU
(1)
DESCRIPTION
Recommended
Action menu
(1)
menu: Maintenance > Recommended Action
Range: None, Inspect
l None: No maintenance required.
l Inspect:Maintenance action required.
Used to report that there is a maintenance issue that requires
attention; it could indicate routine maintenance is due or that a
machine failure (error code) has occurred that required attention.
» Operating Condi-
tion
(1)
menu: Maintenance > Operating Condition
Range: Normal, Inspect
l Normal: No maintenance required.
l Inspect: There is a routine maintenance issue or failure con-
dition (error code) that requires immediate attention.
.Important:Reset the ASL light state and Motor Controller (MC
1
)
status light after repairs a completed.
» Belt Rating
(1)
(Treadmills only)
menu: Maintenance > Belt Rating
Range: 10 - 0 (10 - New condition, ≤ 1 - Replace running belt)
(ASL equipped products only)
A belt rating of 0 or 1 will cause a blue pulsing ASL light indicating
that there is a problem with the running belt/deck and requires ser-
vicing or replacement.
Important:Reset the Belt Rating after replacing with a new run-
ning belt and deck (select Replace).
» Next Maintenance
Due
(1)
menu: Maintenance > Next Maintenance Due
Provides machine next maintenance due remaining mileage or
hours. Perform preventative maintenance when the maintenance
counter reaches 0.
Important:Reset the maintenance interval after completing
routine maintenance service, (select Reset). Treadmills reset to
1000 miles, ellipticals reset to 250 Hrs.
1
Motor controller or motor controller module
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 37
4 Standard Service Menus
Touchscreen Console Standard Service Menus
To Next Page
Loading...
Need help?
General
