Pos. Rear tiller calibration (D.70.20) Pos. Driver's cab calibration (D.70.30)
Figure 62: AUTOMATIC winch calibration (D.70.40) || drive calibration (D.70.70)
NOTICE
Calibration
►
May only be changed by trained service personnel. These changes may influence the driving
characteristics.
Pos. AUTOMATIC winch calibration (D.70.40) Pos. Drive calibration (D.70.70)
1 Remove tracks
2 Engage the brake
3 Set the diesel engine to idle speed
5 The OK button appears only after both
green checkboxes are visible.
Figure 63: Drive calibration (D.70.70) || Drive calibration (D.70.70)
NOTICE
Calibration
►
May only be changed by trained service personnel. These changes may influence the driving
characteristics.
Snow groomer BISON
Operating and Maintenance Manual
BISON 908930245 - 30367
6 - Display
101 (255)
To Next Page
Loading...