Printronix P4280 - Tools, Test Equipment, and Supplies

1–10 Maintenance Overview
Tools, Test Equipment, and Supplies
The tools and equipment required for field level maintenance of P4280
printers are listed below.
Item Part No.
RTV
silicone sealant
Adjustable wrench
Diagonal cutters
Digital voltmeter
Extension 3 in., 3/8 in. drive
Feeler gauge set
Alcohol, anhydrous (must contain no water)
Kimwipes
Nut driver set
Oscilloscope and probes (35 MHz or better)
Pliers, grip ring
Pliers, chain nose
Ratchet, 3/8 in. drive
Rule, steel, 6 in.
Screwdriver, torque, Utica TS–35
Adapter, 1/4 in. hex to 1/4 in. square, Utica HW–18
Hex bit, 3/32 in., torque screwdriver
Hex bit, 5/32 in., torque screwdriver
Screwdriver, Allen hex (set), w/extension
Screwdriver, Phillips
Screwdriver, flat tip
Small magnet
T
ie wraps
Socket, 7/16 in., 3/8 in. drive
101537–001
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–

Lubricant, bearing 101805–001
Force gauge
CAT 719–20
Tweezers –
(Chatillon NY, Gauge–R, 0–20 lb)
(Lubriko M–3, Master Lubricant Co.)

Hex bit, 5/64 in., torque screwdriver –
Hex bit, 3/16 in., torque screwdriver

–
–
–
–
–
Platen Angle Adjustment Tool 996146–001