B–3Printer Specifications
Labels
On Backing: One–part continuous perforated fanfold back form.
Labels must be placed at least 0.42 cm (1/6 in) from
the fanfold perforation. Backing adhesive must not
be squeezed out during printing.
Sheet Size: 7.62 to 40.64 cm (3– to 16–in) wide, including the
two standard perforated tractor feed strips. A
maximum sheet size of 30.48 cm (12 in) between
top and bottom perforations.
Thickness: Not to exceed 0.064 cm (0.025 in)
(including backing sheet)
Printer Dimensions
Height: 108 cm (42.5 in)
Width: 68.6 cm (27 in)
Depth: 72.9 cm (28.7 in)
Weight: Approximately 102 kg (225 lb) – Unpackaged
Approximately 129 kg (285 lb) – Packaged for shipping
Interfaces
Type: Two resident parallel, one resident serial
Logic Levels: TTL/EIA–232D
Data Format: ASCII
Compatibility: Centronics, Dataproducts, EIA–232D
Buffer Size: 2 lines parallel, 1KB serial
To Next Page
Loading...
