ProMinent DULCO flex Control Original Operating Instructions

Order number Name Explanation
52 Metering time batch mode Time in which the batch volume is
to be delivered
53 Batch start Start batch metering by changing
"1" to "0"
54 Batch memory If "1", the volume to be delivered
is added up for each additional
batch contact; if "0", the remaining
volume is cleared and a new
batch process is started
55 Remaining volume batch mode Remaining volume to be metered
in batch mode
61 Volume per contact "contact
mode"
Volume to be delivered with con‐
tact in contact mode
62 Contact memory If "1", the volume to be delivered
is added up for each additional
batch contact; if "0", the remaining
volume is cleared and a new con‐
tact process is started (same as
"batch memory")
71 Setpoint final concentration Desired final concentration in con‐
centration mode
72 Actual value of final concentration Current final concentration in con‐
centration mode
81 Error - see “DULCO flex Control DFXa
data objects" table
82 Warnings - see “DULCO flex Control DFXa
data objects" table
91 Reset stroke counter Reset stroke counter by changing
"1" to "0"
92 Reset metering quantity counter Reset metering quantity counter
by changing "1" to "0"
93 Deletable stroke counter Number of strokes since the last
reset
94 Deletable metering quantity
counter
Totalled metering volumes since
the last reset
95 Litres per stroke Litres per stroke
96 Hose service life - see “DULCO flex Control DFXa
data objects" table
101 Identity code Pump identity code
102 Serial number Pump serial number
103 Pump name Pump name, freely determinable
104 Installation site Installation site, freely determi‐
nable
Supplementary operating instructions for PROFIBUS
®
59

ProMinent DULCO flex Control Specifications

General

Brand	ProMinent
Model	DULCO flex Control
Category	Water Pump
Language	English