Value Meaning
0x37 Transfer OK No further updating
0x55 Transfer OK Fuse / UART error
0x56 Error in timeout -
Tab. 46: Data access types
Value Meaning
0xD3 Write access
0xE5 Read access
4.5.4 Diagnostic messages and types of data access
The diagnostic messages are shown in plain text in the PLC.
Error type Diagnostic messages
12755 Limit error when writing
12773 Limit error when reading
13011 Protected value
13029 Protected value
13267 Device not in remote mode
13285 Device not in remote mode
13523 Option not installed
13541 Option not installed
13779 Service not defined
13797 Service not defined
14035 Value cannot be changed
14053 Value cannot be changed
Tab. 47: Data access types
Value Meaning
0xD3 Write access
0xE5 Read access
Supplementary Operating Instructions for PROFINET
®
74
To Next Page
Loading...
Need help?
General
