ProMinent DULCO flex Control Original Operating Instructions

Order number Name Explanation
61 Volume per contact "contact
mode"
Volume to be delivered with con‐
tact in contact mode
62 Contact memory If "1", the volume to be delivered
is added up for each additional
batch contact; if "0", the remaining
volume is cleared and a new con‐
tact process is started (same as
"batch memory")
71 Setpoint final concentration Desired final concentration in con‐
centration mode
72 Actual value of final concentration Current final concentration in con‐
centration mode
81 Error - see “DULCO flex Control DFXa
data objects" table
82 Warnings - see “DULCO flex Control DFXa
data objects" table
91 Reset stroke counter Reset stroke counter by changing
"1" to "0"
92 Reset metering quantity counter Reset metering quantity counter
by changing "1" to "0"
93 Deletable stroke counter Number of strokes since the last
reset
94 Deletable metering quantity
counter
Totalled metering volumes since
the last reset
95 Litres per stroke Litres per stroke
96 Hose service life - see “DULCO flex Control DFXa
data objects" table
101 Identity code Pump identity code
102 Serial number Pump serial number
103 Pump name Pump name, freely determinable
104 Installation site Installation site, freely determi‐
nable
Tab. 45: Services 2
Value Meaning
0x30 OK -
0x31 Transfer OK Date outside of permitted limits
0x32 Transfer OK Date protected
0x33 Transfer OK Date rejected because device is in
manual and not in remote opera‐
tion
0x34 Transfer OK Date rejected because option is
not installed
0x35 Transfer OK Service not defined
0x36 Transfer OK Value cannot be read or changed
in current device context
Supplementary Operating Instructions for PROFINET
®
73

ProMinent DULCO flex Control Specifications

General

Brand	ProMinent
Model	DULCO flex Control
Category	Water Pump
Language	English