ProMinent DULCO flex Control Original Operating Instructions

Encode the specifier byte as follows:
Status specification: 00 constant
Reserved
59 bytes subsequently remain freely available (user_data):
Errors are indicated using the user_data fields.
The user_data fields are each combined in blocks of 3 bytes and
are interpreted as follows:
1 - Services
2 - Error type
3 - Type of data access (read/write)
Up to 19 errors can thereby be indicated.
Tab. 44: User_Data
Order number Name Explanation
1 Status - see “DULCO flex Control DFXa
data objects" table
11 Start/Stop Complies with Start/Stop switch;
If Start/Stop = 0, then the pump is
stopped
12 Reset Clear internal pump memory and
pending errors by changing "1" to
"0"
21 Target operating mode - see “DULCO flex Control DFXa
data objects" table
22 Actual operating mode - see “DULCO flex Control DFXa
data objects" table
31 Target capacity Setpoint capacity in [l/h]
32 Actual capacity Actual capacity value in [l/h]
41 Max. metering capacity Maximum capacity in [l/h]
51 Volume per contact "batch mode" Volume to be delivered with con‐
tact in batch mode
52 Metering time batch mode Time in which the batch volume is
to be delivered
53 Batch start Start batch metering by changing
"1" to "0"
54 Batch memory If "1", the volume to be delivered
is added up for each additional
batch contact; if "0", the remaining
volume is cleared and a new
batch process is started
55 Remaining volume batch mode Remaining volume to be metered
in batch mode
0 0
user_data
Supplementary Operating Instructions for PROFINET
®
72

ProMinent DULCO flex Control Specifications

General

Brand	ProMinent
Model	DULCO flex Control
Category	Water Pump
Language	English