NOTICE!
Correct sensor operation
Damage to the product or its sur‐
roundings
– Correct measuring and dosing is
only possible if the sensor is
working perfectly
– Check and calibrate the sensor
regularly
NOTICE!
Compensation of control deviations
Damage to the product or its sur‐
roundings
– This controller cannot be used in
control circuits which require
rapid compensation (< 30 s)
3.3 Intended Use
NOTICE!
Intended Use
The device is designed to measure
and regulate liquid media. The desig‐
nated measured variable is detailed
on the controller and is absolutely
binding.
The unit should only be used in
accordance with the technical data
and specifications provided in these
operating instructions and in the oper‐
ating instructions for the individual
components (such as sensors, fit‐
tings, calibration devices, metering
pumps etc.).
Any other uses or modifications are
prohibited.
NOTICE!
Compensation for control deviations
Damage to the product or its sur‐
roundings
– The controller can be used in pro‐
cesses, which require compensa‐
tion of > 30 seconds
Safety and Responsibility
13
To Next Page
Loading...
Need help?
General
