8.5 Information display
The most important parameters for each first-level menu item are displayed in the Infor‐
mation display.
Use to access the Information display from the continuous display. Pressing again
calls up the next Information display. Pressing
calls up the continuous display again.
A1615
ⒾLIMITS
LIMIT↑
= 0.020
LIMIT
↓= 0.010
SENSOR: LF1
TEMP: auto
CABLE LEN: 3.00m
P-REL: alarm
mA OUT: meas val
ⒾCONTROL
PUMP: dosing
↓
TYPE: P
SET= 1.000
mS
/cm
Ⓘ INPUT
CONTACT: pause
Ⓘ OUTPUT
f-REL: dosing
Ⓘ INPUT_2ⒾLAST ERR.
ⒾVERSIONS
SW-VER 01.00.00.00
SN 2366733289 (07)
mA Range↑
88 min
mA Range
↓
136 min
BL-VER 03.02.02.01
TREF: lin 25.0 °C
CELLC: 1.0000cm
-1
TCOEFF= 1.90%/°C
Ⓘ CAL
AUTORNG: 33
Fig. 20: Information display
Use to move from the information display currently shown to the selection menu for
this information display.
Use to move directly back to the information display.
Operating diagram
53
To Next Page
Loading...
