Promise Technology Pegasus32 R6 - Page 116

100
Promise Technology Pegasus32 Series
Redundancy Check
Redundancy Check is a routine maintenance procedure for fault-tolerant disk arrays (those with
redundancy) that ensures all the data matches exactly. Redundancy Check can also correct
inconsistencies.
See “Redundancy Check on a Logical Drive” on page 64.
Making Redundancy Check Settings
To make Redundancy Check settings:
1. Click on the Background Activities icon.
2. Click the Settings button.
3. Click the Redundancy Check Rate dropdown menu and choose a rate:
• Low – Fewer system resources to Redundancy Check, more to data read/write operations.
• Medium – Balances system resources between Redundancy Check and data read/write
operations.
• High – More system resources to Redundancy Check, fewer to data read/write operations.
4. Click the Conrmbutton.
5. Click the X icon to close the background activities panel.
Redundancy Check