Promise Technology Pegasus32 R6 - P Reparing a D Isk a Rray for R Ebuilding a D Isk a Rray

138
Promise Technology Pegasus32 Series
Preparing a Disk Array for Transport
This feature prepares the physical drives that make up the disk array to be removed from the enclosure
and installed in a different location.
To prepare a disk array for transport:
1. Do one of the following actions:
• From the Dashboard window, click the Disk Array link.
• From the Storage menu, choose Disk Array.
2. Mouse-over the disk array you want then click the Transport button.
3. IntheConrmationbox,typetheword“conrm”intheeldprovidedandclicktheConrm
button.
The disk array status changes to Transport Ready.
4. Remove the physical drives and install them in their new location.
See “Transport” on page 197 for more information.
Transporng a disk array