Promise Technology Pegasus32 R6 - Deleting a Disk Array

136
Promise Technology Pegasus32 Series
Deleting a Disk Array
To delete a disk array:
1. Do one of the following actions:
• From the Dashboard window, click the Disk Array link.
• From the Storage menu, choose Disk Array.
2. Mouse-over the disk array you want then click the Delete button.
3. IntheConrmationbox,typetheword“conrm”intheeldprovidedandclicktheConrm
button.
!
WARNING
If you are using utility to create or delete a disk array or logical drive, the
system will reboot if Pegasus32 is running USB mode. It is important to make
sure the Pegasus32 not being accessed (no IO operation in progress) before
submitting the request.
Delete a Disk Array