192
Promise Technology
Pegasus32 R4/R6/R8
Physical Drive Warning Message
If you see messages that says, “ajar HDD from the backplane,” you must reseat the physical drives.
To reseat the physical drives:
1. On the Pegasus unit, press and hold the Power Button LED until it turns red.
2. Wait until the Power Button LED goes dark.
3. For each drive carrier, press the Release button, pull the drive carrier part way out of the unit,
then press the drive carrier back in until it locks.
See “Replacing a Physical Drive” on page 189.
4. Press the Power Button LED to power up the Pegasus unit.
To Next Page
Loading...
