Promise Technology Pegasus32 R6 - Aking D Isk a Rray S Ettings

135
Managing the Pegasus32Pegasus32 Product Manual
Making Disk Array Settings
To make disk array settings:
1. Do one of the following actions:
• From the Dashboard window, click the Disk Array link.
• From the Storage menu, choose Disk Array.
2. Mouse-over the disk array you want then click the Settings button.
3. Make setting changes as required:
• Enter,changeordeletethealiasintheAliaseld
Maximum of 32 characters; letters, numbers, space between characters, and underscore.
• Enable Media Patrol – Check to enable, uncheck to disable on this array.
• Enable PDM – Check to enable, uncheck to disable on this array.
4. Click the Save button.
Create a Disk Array