Promise Technology SmartStor NS4700 - Wake-On-LAN; Choosing a Default NAS System

SmartStor NAS User Manual
4.4.3 Wake-on-LAN
This feature allows you to turn on or wake
up the SmartStor by locate a NAS system.
To wake up a SmartStor:
1. Go to the Main Window.
2. Rignt-click the system in the Device List that you want to wake
up.
3. Choose the Locate NAS item.
It takes about a minute to boot the SmartStor. When fully booted:
• The System Status LED turns blue.
• The buzzer beeps one time.
4.4.4 Choosing a Default NAS System
This feature sets the default NAS system (SmartStor) for the Main
Window and SmartNAVI tray icon. A default NAS activates several
important functions, including:
• Share Folder: Opening a Share Folder
• Backup Now: Performing an Immediate Backup
• Open Advanced Management: Starting the Advanced Storage
Manager
• Event Notice: Enabling Event Notification
If you do not choose a default NAS, SmartNAVI sets the default NAS
after you first log on.
To set a default NAS:
1. Go to the Main Window.
2. Right-click the system in the Device List that you want to make
the default.
3. Choose the Default NAS item.
128