The plug-in is now disabled.
4.4.9 Removing Plug-ins
There are two reasons to remove a plug-in:
․ To replace the old plug-in with a new one
․ You know that you will never use the plug-in
Before you remove a plug-in, consider disabling it, instead. See
“Enabling and Disabling Plug-ins” on page 150.
To remove a plug-in:
1. Go to the Main Window.
2. Click the NAS Management icon. (A)
3. Click the Configuration Plugin button. (B)
4. Click the Plug-in you want to remove. (C)
The plug-inis name will become highlighted.
137
To Next Page
Loading...