SmartStor NAS User Manual
3.6 NAS Tab
3.6.1 Setup Wizard
The system’s Wizard lets you configure your disk array(s) easily and quickly. The
Wizard will guide you through the required settings step by step. You can
choose to configure automatically by using One-Click Setup, or configure
manually by using Advance Setup.
Using Automatic Configuration Wizard
1. Click NAS tab > Wizard.
2. Click the One-Click Setup button. The Automatic Configuration box
displays:
3. The Summary window displays the general information of the system,
including:
− Computer Name
− IP Address
− Storage Type
4. To accept the proposed configuration, click the Submit button.
Note: The system will create the RAID automatically based on the number of the disk
Disk
number
1 2 3 4 5 6
RAID
type
RAID0 RAID1 RAID5 RAID5 RAID5 RAID6
If you disagree with the proposed configuration, click the Advance Setup
button to directly specify all parameters for a new disk array, logical drives,
and spare drives.
66
To Next Page
Loading...