Promise Technology SmartStor NS4700 - Page 65

To set up Access Protection:
1. Click AdminTool tab > Network Policy.
2. Click the Access Protection button and complete the required settings.
− Enable Services – Check to enable the function.
− Block Policy
− Protocol
3. When done, click the Save button.
To set up SSL Certificate:
1. Click AdminTool tab > Network Policy.
2. Click the SSL Certificate button and complete the required settings.
− Specific SSL Certificate – Check to enable the function.
− Certificate (X.509 format)
− Private Key (X.509 format)
3. When done, click the Save button.
65