SmartStor NAS User Manual
3.3 Device Tab
The Device tab displays the information of all device status of the NAS,
including physical drives, disk arrays, logical drives, power supply units,
blowers, and backplanes.
In the Device tab, you can make settings for the enclosure and physical
drives.
3.3.1 Front View
Click Device tab > Front View to view all of the enclosures in the NAS
Move your mouse over the drive carrier to display the information of the
installed physical drive (as show below), including the device ID, physical
capacity, operational status, etc. Click on the drive to bring up the Physical
Drive Information, displaying the detailed information of the device.
24
To Next Page
Loading...
Need help?
General
