Promise Technology SmartStor NS4700 User Manual

SmartStor NAS User Manual
2.3 Connecting the Ethernet cable
To connect the SmartStor NAS to your network:
1. Attach one end of the network cable to the RJ45 network
connection.
Please rep See Figure 2.
2. Attach the other end of the network cable to your Ethernet hub or
switch.
2.4 Connecting the Power
To power the SmartStor NAS:
1. Attach the power cord on the back of the SmartStor enclosure and
plug the other end into the power source. See Figure 2.
2. On the front of the SmartStor NAS, press the power button. See
Figure 1. It takes about a minute to boot the SmartStor. When fully
booted:
․ The System Status LED turns blue. See Figure 1.
․ The buzzer beeps one time.
2.5 Shutting Down the SmartStor NAS
To shut down the SmartStor NAS, press and hold the power button until
the power LED indicator turns red.
14

Promise Technology SmartStor NS4700 Specifications

General

Brand	Promise Technology
Model	SmartStor NS4700
Category	Network Storage Server
Language	English