• Controller. RAID controllers. Click to display the Device tab >
Component List screen.
• Voltage. Click to display the Device tab > Component List screen.
• Temperature. RAID and JBOD enclosures only. Click to display the
Device tab > Component List screen.
• PSU. Power supply unit. RAID and JBOD enclosures only. Click to
display the Device tab > Component List screen.
• Cooling Unit. RAID and JBOD enclosures only. Click to display the
Device tab > Component List screen.
• Disk Array. Click to display the Storage tab > Disk Array screen.
• Logical Drive. Click to display the Storage tab > Logical Drive
screen.
• Physical Drive. Click to display the Device tab > Physical Drive
List screen.
• Spare Drive. Click to display the Storage tab > Spare Drive screen.
• File System. Click to display the NAS tab > File System screen.
• Firmware. Click to display the AdminTool tab > Firmware Update
screen.
3.2.2 Event Information
The Event Information field displays six of the most recent Runtime events.
Click More to display the AdminTool tab > Runtime Events screen, allowing
you to view all Runtime and NVRAM events.
3.2.3 Storage Overview
The Storage Overview field displays the general information of the current
storage status, including:
• Total Physical Capacity. Display the total storage space of the
system.
− Unconfigured – not assigned to a logical drive.
− Configured – assigned to a logical drive.
• Device Number. Display the current number of devices in the
system.
23
To Next Page
Loading...