Logical Drive Corrective Action
Logical drive initialization has
started
Result of user action. Normal.
Logical drive initialization has
completed
Logical drive is ready to use. Normal.
Logical drive initialization has
paused
Initialization paused because of user
intervention, schedule or a higher priority
background activity.
Logical drive initialization has
resumed
Initialization has resumed again after a
pause.
Logical drive initialization has
stopped
Initialization stopped because of user
intervention, schedule or the logical drive
was deleted or went critical or offline.
Logical drive initialization
marks the logical drive offline
Initialization failure due to a failed disk
drive. Replace the disk drive, delete and
recreate the logical drive.
Logical drive initialization is
aborted due to an internal
error.
System resources are low. Reduce
system load or restart the NAS.
Logical drive initialization is
queued
Initialization has been set manually or by
schedule.
A new logical drive has been
created
Result of user action. Normal.
Logical drive has been deleted Result of user action. Normal.
Logical drive has been placed
online
The physical drives of the array are
restored to online status.
Logical drive has been placed
offline. Possible data loss
One or more physical drives in the array
went offline.
Logical drive has been set to
critical.
One or more physical drives in the array
went offline.
Logical drive axle has been
placed online
RAID 50 and 60. One of the axles (RAID
5 or 6 arrays) returned on online status.
Media Patrol Corrective Action
Media patrol is started Result of settings or user action. Normal.
Media patrol is completed Normal.
Media patrol is paused Media patrol paused because of user
intervention, schedule or a higher priority
background activity.
Media patrol is resumed Media patrol has resumed again after a
pause.
147
To Next Page
Loading...
Need help?
General
