SmartStor NAS User Manual
of usable drive capacity.
Table Rounding – Applies a predefined table to
determine how much to truncate.
− Write Back Cache Flush Interval – Enter a value into the field,
1 to 12 seconds
− Phydrv Driver Temperature Threshold
− Enclosure Polling Interval
− Adaptive Writeback Cache:
UPS power good: write back
UPS power fail: write through
No UPS: write through
− Host Cache Flushing
− Forced Read Ahead (cache) – Check the box to enable or
uncheck to disable
3. Click the Save button.
• Buzzer
− Click the Sound button to unmute the buzzer; or click the Mute
button to mute the buzzer.
− Click the Settings button to enable or disable the buzzer.
To enable the buzzer for the system, select the Enable Buzzer
option and click the Save button. To mute the buzzer for all
events, you must clear the Enable Buzzer option.
• LED. Move your mouse over the LED and click the Settings button,
which allows you to set the LED by selecting:
− Always ON
− Always OFF
− Daily
When done, click the Save button.
28
To Next Page
Loading...
Need help?
General
