Promise Technology Vess A3340 User Manual

113
Managing with WebPAM PROeVess A3340 Product Manual
creatIng a uSer
To create a user:
1. Log into WebPAM PROe as the Administrator or a Super User.
2. Click the Administrative Tools icon.
3. Click the User Management icon.
4. Click the Create tab in Management View.
5. Enter a user name in the User Name eld.
6. Enter a password for this user in the New Password and Retype Password elds.
A password is optional. If you do not assign password, tell this user to leave the password eld blank when he/
she logs into to WebPAM PROe.
7. Check the Enabled box to enable this user on this subsystem.
8. Enter a display name in the Display Name eld.
A display name is optional but recommended.
9. Choose a privilege level from the Privilege drop-down menu.
For denitions of each privilege level, see the List of User Privileges below.
10. Click the Submit button.

Promise Technology Vess A3340 Specifications

General

Brand	Promise Technology
Model	Vess A3340
Category	Network Hardware
Language	English