Managing SNMP Trap Sinks (CLU)
Viewing a List of Trap Sinks
To create a trap sink:
1. Main Menu >> Additional Info and Management >> Software Management >> SNMP
>> Trap Sinks
A list of the current trap sinks appears.
Adding a Trap Sink
To add a trap sink:
1. Main Menu >> Additional Info and Management >> Software Management >> SNMP
>> Trap Sinks >> Create New Trap Sink >> Trap Sink IP address
2. Press the backspace key to erase the current value, then type the new IP address in this eld.
3. Highlight Trap Filter and press the spacebar to toggle through the severity levels.
See the Table below.
4. Press Control-A to save the Trap Sink.
Event Severity Levels
Level Description
Fatal Non-recoverable error or failure has occurred.
Critical Action is needed now and the implications of the condition are serious.
Major Action is needed now.
Minor Action is needed but the condition is not a serious at this time.
Warning User can decide whether or not action is required.
Information Information only, no action is required.
86
Vess A Class NVR Storage Appliance Promise Technology
To Next Page
Loading...
Need help?
General
