Making Disk Array Settings (CLU)
To make disk array settings:
1. Main Menu >> Disk Array Management
The list of disk arrays appears.
2. Highlight the disk array you want and press the Enter.
3. Make settings changes as required:
• Enter, change or delete the alias in the Alias eld
Maximum of 32 characters (letters, numbers, spaces, and underscores).
• Media Patrol – Highlight and press the spacebar to
toggle between enable and disable.
• PDM – Highlight and press the spacebar to toggle between enable and disable.
• Power Management – Highlight and press the spacebar
to toggle between enable and disable.
4. Press Control-A to save your settings.
Notes
You can also enable or disable Media Patrol for the entire RAID system.
Power Management must be enabled on the disk array for the HDD Power Saving
settings to be effective.
Power management is limited to the features your HDDs actually support.
57
Managing with CLUVess A3340 Product Manual
To Next Page
Loading...
Need help?
General
