Running Media Patrol (CLU)
Media Patrol is a routine maintenance procedure that checks the magnetic media on each disk drive.
Media Patrol checks all physical drives assigned to disk arrays and spare drives. It does not check
uncongured drives.
To start, stop, pause or resume Media Patrol - Main Menu >> Subsystem Management >>
Media Patrol >> [Start, Stop, Pause, or Resume]. If you choose Stop, press Y to conrm.
Locking or Unlocking the Subsystem (CLU)
The lock prevents other sessions (including sessions with the same user) from making a conguration
change to the controller until the lock expires or a forced unlock is done. When the user who locked
the controller logs out, the lock is automatically released.
Setting the Lock
To set the lock:
1. Main Menu >> Subsystem Management >> Lock Management
2. In the Lock Time eld, type a lock time in minutes.
1440 minutes = 24 hours
3. Highlight Lock and press Enter.
Resetting the Lock
To reset the lock with a new time:
1. Main Menu >> Subsystem Management >> Lock Management
2. In the Lock Time eld, type a lock time in minutes.
1 to 1440 minutes (24 hours)
3. Highlight Renew and press Enter.
35
Managing with CLUVess A3340 Product Manual
To Next Page
Loading...
Need help?
General
