Important
If a user is logged-in when his account is disabled, the user is immediately
logged-out.
Changing User Password (CLU)
The Administrator or a Super User can change other users’ passwords.
To change a password:
1. Main Menu >> Additional Info and Management >> User Management
2. Highlight the User whose password you want to change and press Enter.
3. Highlight Change Password... and press Enter.
4. Highlight New Password and type a new password.
Maximum 31 characters. Use letters, numbers, and underscore.
5. Highlight Retype Password and type the new password again to verify.
6. Press Control-A to save the new password.
Note
To reset the Administrator’s password to the factory default, see
“Restoring Factory Defaults (CLU)” on page 88.
81
Managing with CLUVess A3340 Product Manual
To Next Page
Loading...
Need help?
General
