User Privileges
Level Meaning
View
Allows the user to see all status and settings but not to make any
changes
Maintenance
Allows the user to perform maintenance tasks including Rebuilding, PDM,
Media Patrol, and Redundancy Check
Power
Allows the user to create (but not delete) disk arrays and logical drives,
change RAID levels, change stripe size; change settings of components
such as disk arrays, logical drives, physical drives, and the controller
Super
Allows the user full access to all functions including create and delete
users and changing the settings of other users, and delete disk arrays
and logical drives.
The default “administrator” account is a Super User
Changing User Settings (CLU)
The Administrator or a Super User can change other users’ settings.
To change user settings:
1. Main Menu >> Additional Info and Management >> User Management
2. Highlight the User whose settings you want to change and press Enter.
3. Highlight Privilege and press the space bar to toggle though the options.
See the Table above.
4. Highlight Status and press the space bar to toggle between Enabled and Disabled.
5. Highlight the items you want and press the backspace key to erase the current value, then
type the new value:
• User name
• Email address
6. Press Control-A to save the settings.
80
Vess A Class NVR Storage Appliance Promise Technology
To Next Page
Loading...
Need help?
General
