HArdwAre setup
This chapter presents the basics on unpacking, setting up hardware for the Vess A3340. Hardware installation
includes installing the unit in an equipment rack, connecting the power, making network, data and management
connection to the device, and installing hard drives.
The sections in Hardware Setup include the following:
• “Unpacking”
• “Mounting the Vess A3340 in a rack”
• “Installing Disk Drives”
• “Number of Drives Required”
• “Remove Security Cover”
• “Drive Slot Numbering”
• “Drive carriers”
• “Management Path Connections”
• “Connect the Power”
• “Power On Vess A3340”
• “Connect to iSCSI Storage Area Network (SAN)”
9
Hardware SetupVess A3340 Product Manual
To Next Page
Loading...
Need help?
General
