142
Vess A Class NVR Storage Appliance Promise Technology
Warning
When you delete a disk array, you also delete any logical
drives that belong to it, along with the data they contain.
When you initialize a logical drive, you delete all data on the
logical drive.
Back up any important data before deleting a disk array or
logical drive.
Options
-a <action> Species the action to perform.
list (Default) Displays a summary of all arrays, a specied number of arrays, or a specic
array.
add Adds/creates an array. This action might also create logical drives at the same time.
addld Adds/creates a logical drive to an existing array.
delld Deletes a logical drive from an array.
mod Modies array settings.
del Deletes an array and all its associated logical drives.
locate Locates an array.
accept Accepts the condition of an incomplete array. The condition that can cause an array
to be incomplete is:
• Missing Drive: one or more drives missing in the array
Important
A logical drive cannot be expanded once it has been created. To add
capacity, you can either add another logical drive, or, delete the existing
logical drive and create a larger one.
To Next Page
Loading...
Need help?
General
