Promise Technology Vess A3340 - Page 156

145
Managing with CLIVess A3340 Product Manual
-t <condition type> Species the type of incomplete condition to accept. If not specied, it
will accept the current incomplete condition by default.
missingdrive The condition of missing drive in the array.
-v Verbose mode. Displays all array properties, requires -a list option.
Examples
array -v -c 1
array -a add -s “alias=MyArray,mediapatrol=enable” -p 1,3,5~9
-l “raid=5,capacity=50gb,stripe=256kb,sector=1kb”
array -a add -p 1,3,5~9 -l “raid=5,capacity=50gb,stripe=256kb”
array -a mod -d 1 -s “alias=YourArray,mediapatrol=disable”
array -a del -d 3
array -a locate -d 0
array -a addld -d 0 -l “raid=1e,capacity=125gb,stripe=64kb”
array -a delld -l 1