181
Managing with CLIVess A3340 Product Manual
snmp SNMP
-t <startup type> Species the startup type.
automatic Component is automatically started when system boots.
manual Component has to be manually started by issuing command.
-s “<option>=<value>” Used to specify settings for this component. This is used when
modifying (mod). These options are comma separated.
email settings
serverip= SMTP server IP address.
serverport= SMTP server port number.
authentication= SMTP server authentication.
no
yes
username= Username if using SMTP authentication.
password= Password if using SMTP authentication.
senderaddr= Sender’s email address.
subject= Email subject.
webserver settings
httpport= Port number for web server.
sessiontimeout= Session time out in minutes. Maximum 1440.
ssl= Turn on or off SSL for web server.
enable
disable
httpsport= Port number if using SSL.
snmp settings
port= Port number.
sysname= System name string.
syslocation= System location string.
syscontact= System contact information string.
To Next Page
Loading...
Need help?
General
