EasyManua.ls Logo

Pronto M50 - M61 Wheelchairs

Pronto M50
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SECTION 5—WHEELCHAIR OPERATION
Part No. 1125085 31 Pronto
®
M50
, M51
and M61
with SureStep
M61 Wheelchairs
NOTE: For this procedure, refer to FIGURE 5.5.
1. Perform one (1) of the following:
Adjust Speed in 20% Increments (5 Speed Mode) - Press the tortoise button ( )
or hare button ( ) to decrease/increase the speed in 20% increments. The larger
bars in the speedometer will light.
Adjust Speed in Smaller Increments (VSP Mode) - Perform the following steps:
i. Press and hold both the tortoise button ( ) and hare button ( ) until the
joystick beeps.
ii. Perform one (1) of the following:
Press the tortoise button ( ) or hare button ( ) to decrease/increase the
speed in 20% increments. The larger bars in the speedometer will light.
Press and hold the tortoise button ( ) or hare button ( ) to decrease/
increase the speed in smaller increments. The smaller bars in the
speedometer will light.
FIGURE 5.5 Adjusting the Speed - M61 Wheelchairs
Tortoise Button
Hare Button
Larger Bar in Speedometer
Smaller Bar in Speedometer

Table of Contents

Related product manuals