Reference MVI56E-MNETC/MNETCXT ♦ ControlLogix Platform
User Manual Modbus TCP/IP Client Enhanced Communication Module - Client/Server
Page 158 of 172 ProSoft Technology, Inc.
September 20, 2018
To check the status of the message, refer to the ReadClockMSG tag.
5.5.7 Writing the Clock Value to the Module
Expand the MVI56EMNETCCLOCK controller tag.
Set the new Clock value in MVI56EMNETCCLOCK.Config:
Move a value of 1 to MVI56EMNETCCLOCK.Write.
The bit will be automatically reset to 0.
To Next Page
Loading...